About the Twin Bridges:

The Twin Bridges custom knife is a unique and one of a kind knife in a compact size and very useful size. The handle is crafted from a beautiful piece of box elder burl. The box elder was harvested, cut, processed, stabilized and brown dyed in our factory. The gray G10 liner adds a subtle accent to the overall handle. The handle has been glued together with commercial grade epoxy and fastened using stainless steel pins. 

The "ripple" pattern of damascus steel is a beautiful open pattern of damascus. The blade has been given a high polish to bring out the contrast of the open layers of steel.  The high-carbon damascus which is made up of 1080 and 15N20 is forged here in our factory in Idaho. No two pieces of damascus are ever the same, making each knife a unique treasure.

The leather sheath is made from 8 oz, saddle skirting that has been dyed a rich brown. The leather we used comes from one of the oldest tanneries in the USA, Wickett & Craig. The sheath has a hand-tooled stamp pattern along the edge of the sheath. The sheath has been hand wet-formed to provide a nice tight fit for this one of a kind knife. Each knife is hand forged, ground and made by our team of skilled artisans.

TWIN BRIDGES KEY FEATURES: Ripple Damascus Steel | Brown Dyed and Stabilized Box Elder Burl | Gray G10 Liner | Fully Hand Stamped Edge, Wet-Formed, Brown Leather Sheath

TECHNICAL SPECIFICATIONS:

TOTAL LENGTH: 6.50” (16.51 cm)

BLADE LENGTH: 2.50” (6.35 cm)

HANDLE LENGTH: 3.75” (9.52 cm)

BLADE WIDTH: 1” (2.54 cm)

BLADE THICKNESS: .158" (4.01 mm)

KNIFE WEIGHT: 3.65 oz (103 g)

BLADE TYPE: Drop Point

BLADE STEEL: High-Carbon Damascus

DAMASCUS PATTERN: Ripple

BLADE GRIND: Flat

HANDLE MATERIAL: Brown Dyed and Stabilized Box Elder Burl

HANDLE FINISH: Hand-Contoured and Shaped

HANDLE LINER: Gray G10

HARDWARE: Stainless Pins

BOLSTER MATERIAL: N/A 

SHEATH TYPE: Brown Leather, Belt Loop, Fully Hand-Stamped Edge

SHEATH WEIGHT: 1.30 oz (37 g)

CARRY ORIENTATION: Right, Vertical

LANYARD HOLE: No

*Just like all things, proper care should be given to the knife blade. We recommend cleaning with warm water and completely drying after use. We recommend applying WD40 or some type of gun oil to the blade immediately after drying to help deter spotting/rusting. Always clean and oil your knife before extended storage. Never store your knife in the leather sheath for extended time periods. The high-carbon nature of this damascus steel is prone to rusting and discoloration if not properly cared for.

*Logo and other markings will be placed on the blade after purchase is made.