Wind River Tier 1
ABOUT THE WIND RIVER FRAME LOCK TIER 1:
The primary goal of the Wind River is to provide a practical, well built folding knife that will last for generations. To build something that can provide a lifetime of use takes superior materials and craftsmanship. All major parts are designed and manufactured in house in order to control part quality and tolerances. We chose contoured grade 5 titanium handles to provide a solid grip, in addition to superior corrosion resistance in even the harshest conditions. The smooth, clean action is the result of ceramic bearings making orthogonal contact with hardened stainless-steel surfaces on both sides. These knives are meant to be used every day, and we understand that in tough conditions you tend to get dirty. By removing the frame retention screw and one pivot screw, you get access to every part of the knife for maintenance and cleaning. The Bohler Elmax blade features a solid drop point and slight recurve that pushes materials into a razor sharp edge that will hold up to heavy cutting.
All parts are backed by our Razor Life warranty. This includes transferable lifetime factory sharpening and maintenance, as well as defects in the manufacturing and craftsmanship of the parts.
WIND RIVER STANDARD KEY FEATURES: Flat Ground Blade | 6Al4V Machined Titanium Frame Lock | Reeve Integral Lock with Ceramic Ball Interface | ELMAX Blade | Custom Walnut Box
TOTAL LENGTH: 7.62” (17.46 cm)
BLADE LENGTH: 3.10” (6.98 cm)
HANDLE LENGTH: 4” (10.16 cm)
BLADE HEIGHT: .99” (3.10 cm)
HANDLE HEIGHT: 1.14"
HANDLE THICKNESS: .468" 3D (NOT INCLUDING POCKET CLIP) INCLUDING POCKET .616" STANDARD HANDLE THICKNESS .480"
BLADE THICKNESS: .150 (3.37 mm)
TOTAL WEIGHT: 4.20 oz (119 g)
BLADE TYPE: Drop Point
BLADE STEEL: Bohler ELMAX Stainless Steel at 60-61 RC
BLADE GRIND: Flat
BLADE FINISH: Polished Stone Washed
LOCK Type: The Industries 1st Flipper with the "Reeve Integral Lock with Ceramic Ball Interface" (Frame Lock)
HANDLE MATERIAL: 6Al4V Titanium
HANDLE FINISH: Stone Washed Flats with a polished chamfer
HARDWARE: Titanium Pivot Screws, Lock-bar Stabilizer. Stainless Steel Pivot Barrel and Frame Retention Screw
CLIP: 6A14V Machined Titanium with Ceramic Ball
OTHER FEATURES: Internal Pocketing for Weight Reduction. Simple Dual Screw Disassembly
*Each blade is hand-ground